Tarvikud

The new Caratec mirror monitor makes maneuvering very easy. The image from the reversing camera is right in your intuitive field of vision. The guidelines, which can be set by remote control, also help to correctly estimate distances to obstacles and thus avoid expensive damage to the motorhome.

The integrated 10.9 cm (4.3 inch) monitor has a very high maximum brightness, making it easy to read. In addition, unwanted reflections, e.g. due to sunlight, are considerably lower at the position of the mirror than with conventional monitors.

The monitor switches on automatically when reverse gear is engaged and can be easily switched on while driving using the switch below the mirror surface. The brightness is automatically regulated and can also be adjusted.
The special 4 mm thick mirror glass with Third Surface Reflector Technology is also used in automotive original equipment and ensures optimum visibility, both as a mirror and in monitor mode.

Installation is very easy thanks to the vehicle-specific holder and cable set. A remote control, e.g. for setting the parking lines, is included in the scope of delivery.

Camera input 1: 4-pin mini-DIN coupling, suitable for CS...L cameras or the MCA29004 cable. Can also be used for cameras with cinch connection with the optional adapter CSZ102M.
Camera input 2: Cinch coupling for universal use

With E-mark for electronics (ECE R10) and rear-view mirror (ECE R46).

Dimensions (without holder): 270 x 81 x 45 mm

Included in the scope of delivery:

• Mirror monitor
• remote control
• Cable set
• Monitor holder for Fiat Ducato, Citroen Jumper and Peugeot Boxer X290 (from 2014)
• also suitable with REMIS darkening system
• cannot be used in conjunction with Dometic FP 200 or FP 300 darkening system
• not suitable for vehicles with camera-based assistance systems. Please use version CSM4300SD.2 for this.

Vehicle-specific holders for other vehicle models such as Mercedes-Benz Sprinter or Ford Transit are available separately as an option.