Tarvikud

The N-XFDUC8 set contains a device mounting bracket consisting of a plastic front with side device brackets. The side mounting holes in the bracket are designed to fit the ZENEC Z-E3766 and XZENT X-F270 exactly. The device is mounted using two M5 screws on both the left-hand and right-hand side.

Product description: 

• 1 x radio mounting bracket for mounting a ZENEC Z-E3766 or XZENT X-F270 device in FIAT Ducato III, Series-8-based vehicles
• 4 x M5x6 countersunk screws for device mount, front panel with side mounting plates made of ABS plastic.

Compatibility: 

The N-XFDUC8 enables the ZENEC Z-E3766 and/or XZENT X-F270 devices to be mounted in the following target vehicles:

• FIAT Ducato III, Series 8 from 2021, all vehicle model lines and motorhomes based on them with radio fitting

Notes:

The original bracket for the radio preparation is replaced with the N-XFDUC8 frame and fastened with the four original screws, which ensures quick and easy installation. Depending on the body manufacturer, additional antenna splitters, FM/DAB splitters or ISO cable sets with radio switches may be required. The original steering wheel remote control in Series 8 vehicles with radio preparation is directly supported by the compatible device models mentioned above, i.e. no additional interfaces are required. The telephone buttons on the front of the steering wheel are not resistive. Therefore, the telephone buttons are operated by means of double assignment of the MUTE rocker switch on the back. Calls can be accepted and ended via the MUTE rocker switch.